The Cat® 246D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Informações Tećnicas

• Gross Power - SAE J1995: 55.4 kW
• Operating Weight: 3392 kg
• Rated Operating Capacity: 1000 kg

Mais informações

Engine

• Gross Power - SAE J1995: 55.4 kW / 74.3 HP
• Net Power - SAE 1349: 54.4 kW / 72.9 HP
• Displacement: 3.3 l / 203 in³
• Stroke: 120 mm / 4.7 in
• Bore: 94 mm / 3.7 in
• Peak Torque - 1,500 rpm - SAE J1995: 265 N·m / 195 ft·lbf
• Engine Model: Cat C3.3B DIT (turbo)
• Net Power - ISO 9249: 54.9 kW / 73.7 HP
• Net Flywheel Power: 54.4 kW / 72.9 HP

Operating Specifications

• Rated Operating Capacity: 1000 kg / 2200 lb
• Tipping Load: 2000 kg / 4400 lb
• Breakout Force - Tilt Cylinder: 3336 kg / 7355 lb
• Rated Operating Capacity with Optional Counterweight: 1095 kg / 2410 lb
• Note: Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Weights

• Operating Weight: 3392 kg / 7478 lb
• Note: Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Dimensions

• Wheel Base: 1249 mm / 49.2 in
• Height - Top of Cab: 2110 mm / 83.1 in
• Vehicle Width over Tires: 1676 mm / 66 in
• Ground Clearance: 226 mm / 8.9 in
• Departure Angle: 26°
• Maximum Dump Angle: 39°
• Bumper Overhang - Behind Rear Axle: 1083 mm / 42.6 in
• Rack Back Angle - Maximum Height: 96°
• Length - Without Bucket: 2993 mm / 117.8 in
• Maximum Overall Height: 4032 mm / 158.7 in
• Maximum Reach - With Arms Parallel to Ground: 1388 mm / 54.6 in
• Length - With Bucket on Ground: 3708 mm / 146 in
• Turning Radius from Center - Coupler: 1401 mm / 55.2 in
• Bucket Pin Height - Carry Position: 200 mm / 7.9 in
• Bucket Pin Height - Maximum Lift: 3154 mm / 124.2 in
• Clearance at Maximum Lift and Dump: 2465 mm / 97.1 in
• Turning Radius from Center - Bucket: 2181 mm / 85.9 in
• Turning Radius from Center - Machine Rear: 1806 mm / 71.2 in
• Reach - Maximum Lift/Dump: 600 mm / 23.6 in
• Note: Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Hydraulic System

• Hydraulic Flow - Standard - Loader Hydraulic Pressure: 23000 kPa / 3335 psi
• Hydraulic Flow - Standard - Hydraulic Power (Calculated): 33 kW / 44 HP
• Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure: 28000 kPa / 4061 psi
• Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated): 57 kW / 76 HP
• Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow: 121 l/min / 32 gal/min
• Hydraulic Flow - Standard - Loader Hydraulic Flow: 86 l/min / 23 gal/min

Cab

• ROPS: ISO 3471:2008
• FOPS: ISO 3449:2005 Level I

Power Train

• Travel Speed - Forward or Reverse - One Speed: 12.5 km/h / 7.7 mile/h
• Travel Speed - Forward or Reverse - Two Speed Option: 17.7 km/h / 11 mile/h

Service Refill Capacities

• Chain Box - Each Side: 12.7 l / 3.3 gal (US)
• Cooling System: 14 l / 3.7 gal (US)
• Engine Crankcase: 11 l / 3 gal (US)
• Fuel Tank: 105 l / 27.7 gal (US)
• Hydraulic System: 52 l / 13.7 gal (US)
• Hydraulic Tank: 39 l / 10.3 gal (US)

Noise Level

• Inside Cab*: 81 dB(A)
• Note (3): **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
• Outside Cab**: 101 dB(A)
• Note (1): Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
• Note (2): *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Air Conditioning System (if equipped)

• Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.